How to combine sketches in fusion 360 ?

Best answer:

1. . Select wireframe on sketch by dragging a window over sketch items.
2. . Then use Ctrl C (Copy).
3. . Deselect items.
4. . Select a new sketch plane for items to be pasted in.

How do you join Fusion 360?

FAQ

How do I insert a drawing into another drawing in Fusion 360?
You could insert one design into the other as a reference. To do this, open one design, right-click the other design in the data panel on the left and select “Insert into current design” from the menu.

How can you link two dimensions together in a sketch?
yes. There’s two ways you can do this. The first way is to use the dimension number (this is the parameter name under the sketch in the parameter dialog) and divide it by 2 for your smaller circle. then use the parameter name when creating your dimensions.

How do you copy a body from one design to another on Fusion 360?
You can copy Components between designs, so if the body is in a component on it’s own, select the component and Copy change to the other design right click on the canvas and select Paste New. If the body is in a component with other bodies you’ll have to use Create components from bodies first.

How do you create assembly in Fusion 360?
Create a new design for the assembly and save it. Right click on one of the components in the data panel, then click “Insert into current design”. Select a location for the component, then click ok. After the component is imported, it can be assembled by using the joint command.

How do you combine objects in fusion?
To join or combine solids or bodies, Do the following: Click Design > Solid > Modify > Combine. . From the Combine dialog, select the Target Body.

How do I combine surfaces in Fusion 360?

1. Click Design > Surface > Modify > Merge . The Merge dialog displays.
2. On a surface body, select two or more adjacent faces.
3. Click OK.

How do you make a fusion joint?
Create a joint between the shaft and the gear housing In the Model workspace, choose Assemble > Joint. In the Joint dialog, set Motion Type to Revolute. Fusion 360 enables the required degrees of freedom for the motion type. Fusion 360 automatically chooses the Z axis, but you can specify another axis if necessary.

How do you link dimensions?

1. Right-click the dimension and select Link Values.
2. In the Shared Values dialog box, select or type a Name. In addition to the linked variable names you create, global variables are also available for selection under Name.
3. Click OK.
4. Repeat for as many dimensions as needed.

Why are sketches locked in Fusion 360?
The lock symbol on a sketch means it is fully constrained (this is preferable). Also – you should take care of warnings in the timeline.