How to scale parts in solidworks ?

Best answer: In a part document, click Scale (Features toolbar) or Insert > Features > Scale . Set options in the PropertyManager. The geometry of the model increases or decreases in size according to the scaling factors and other options you set. The Scale feature scales only the geometry of the model.

How do you rotate a part in SOLIDWORKS?

FAQ

How do you change the scale of a part in a drawing in Solidworks?
You can change the scale of a drawing sheet by selecting a scale from a predefined list or specifying a custom scale. To change the scale of an existing drawing sheet: In the status bar, click Sheet Scale and click a scale. If there are annotations in the drawing sheet, specify options in the dialog box and click OK.

Can you scale parts in assembly solidworks?
To scale an entire SOLIDWORKS assembly, it is possible to scale each part independently, however this could be extremely tedious for an assembly with a large number of components. Alternatively, you can save the assembly as a multi-body part and scale this part in a single step.

How do you scale an entire assembly in Solidworks?
Access the Scale tool (Insert, Features, Scale). Select all of the solid bodies in the part to be scaled. Choose the Scale Factor and other options as desired (for best results with a multi-body part, scale about the Origin). Click OK, as shown in the figure below.

See also  How to save exploded view in solidworks ?

How do I scale a drawing in SOLIDWORKS?

  1. In an active sketch, click Modify Sketch. (Sketch toolbar) or Tools > Sketch Tools > Modify.
  2. In the dialog box, under Scale About, select one of the following: Option. Description. Sketch origin.
  3. Type a value for Factor, and press Enter. You cannot scale a sketch that has external references.
  4. Click Close.

How do you scale all measurements in SOLIDWORKS?

  1. Insert a design table from Insert > Tables > Design Table.
  2. Leave all settings as default and click on the green checkbox.
  3. A “Dimensions” window will pop up with a list of all dimensions used in the model, select them all and click on OK.
  4. Edit the design table.

How do I stretch a part in SOLIDWORKS?

  1. Click Base point. and then click on the sketch to set a base point.
  2. Drag to stretch the sketch entities. When you release, the entities stretch to that point and the PropertyManager closes.

How do I change dimension size in SOLIDWORKS?
To change a dimension: Double-click a dimension. The Modify dialog box appears. Change the dimension value with the arrows, thumbwheel , mouse wheel, or by typing in the dimension box.

How do you enlarge a scale drawing?
Projectors are an excellent way to scale drawings up. Opaque projectors can be used to project an image such as a drawing onto a larger surface. Simply trace over the projected image and your drawing is scaled up. Digital projectors are also a good way to enlarge drawings.

See also  How to change material properties in solidworks ?

What is the scale tool in SOLIDWORKS?
Scaling is a tool that allows for the dimensions of a part to be changed all at once by a certain factor, instead of changing each individual one. Scaling can be used for adding clearance, accounting for thermal expansion, converting units, or if there are multiple instances of similar parts at different sizes.

How do you scale an assembly in Solid Edge?

  1. Once you have saved the original part.
  2. In the blank part document select “Part Copy” which can be found in the Clipboard.
  3. Select your part from the file location.
  4. The Part Copy Parameters dialogue box appears.
  5. Towards the bottom you will see where you can scale the part.

How do you scale a sketch in SOLIDWORKS 2018?
(Sketch toolbar) or Tools > Sketch Tools > Scale. In the PropertyManager, under Entities to Scale, select sketch entities for Sketch item or annotations. , and then click in the graphics area to set the point to Scale about.

How do I convert assembly to part in SOLIDWORKS?

  1. In an assembly, click File > Save As.
  2. Select Part (*. prt;*. sldprt) for the file type.
  3. Select Include specified components.
  4. Select Override defaults.
  5. Click Save.
Back to top button